2018 Product Catalog

204 Ratings DS 60 Hazardous Location Plugs & Receptacles – 60A • Voltage 600 VAC • Current Interruption Capability Not for current interrupting • Horsepower Ratings 1Ø 3 hp 1Ø 5 hp 3Ø 10 hp 3Ø 10 hp 3Ø 25 hp 3Ø 25 hp • Short Circuit Rating 100kA Withstand Testing was performed with RK1 current limiting fuses sized at 400% of the highest full load motor ampacity associated with the devices hp rating. • Environmental Ratings Type 4X • Temperature Range Min -40°F/Max 104°F See pg 253 for temps below -15°F. • Wiring Capacity Min 10 AWG Max 2 AWG Aux Contacts - Max 14 AWG • Applicable Standards CSA C22.2 No. 182.1 CSA 213-M1987 • Hazardous Ratings Class I, Division 2, Groups ABCD, T6 Class I, Zone 2, IIC Devices rated for hazardous locations are not returnable. 120V 240V 208V 240V 480V 600V Voltage Polarity Part # Part # Metal Metal 120V 1P+N+G 36-64165 36-68165 120 208V 3P+N+G 36-64167 36-68167 125V 1P+N+G 36-64075 36-68075 125 250V 2P+N+G 36-64076 36-68076 208V 2P+G 36-64162 36-68162 208V 3P+G 36-64163 36-68163 250V 2P+G 36-64072 36-68072 250V 3P+G 36-64073 36-68073 277V 1P+N+G 36-64045 36-68045 277 480V 3P+N+G 36-64047 36-68047 347 600V 3P+N+G 36-64147 36-68147 480V 2P+G 36-64042 36-68042 480V 3P+G 36-64043 36-68043 600V 2P+G 36-64142 36-68142 600V 3P+G 36-64143 36-68143 Receptacle Options Suffix # Inlet Options Suffix # With 2 Auxiliary/Pilot Contacts Recept # - 972 With 2 Auxiliary/Pilot Contacts Inlet # - 972 With 4 Auxiliary/Pilot Contacts Recept # - 974 With 4 Auxiliary/Pilot Contacts Inlet # - 974 Normally Open Lid Configuration Recept # - NO With No Lockout Hole Inlet # - A155 Receptacle (female) Inlet (male) North American UL/CSA Configurations (cCSAus) Standard locking pawl Standard DS60 Zone 2 lid is normally closed Feature Spotlight – Screw-Type Locking Pawl DS60 Division 2 / Zone 2 receptacles feature a standard screw-type locking pawl. This required feature allows the user to lock the plug to the receptacle by tightening a screw on the pawl. For added security, a lockout hole is included on the receptacle that enables the user to insert a 5/16” lock or locking pin to prevent the plug from being disconnected or to lock the receptacle lid closed. 5/16” hole for added security Safety Requirement Users must tighten screw to lock the plug in the mated position ! See pages 230-239 for detailed information on these options ! Don’t forget to add installation accessories to your order

RkJQdWJsaXNoZXIy OTk3MQ==