meltricheaderbecma
about us

safety_guide

Safety Guide

free_sample

 

arc_flash_protection
decontactor_connected
 decontactor_disconnected
Decontactors are a combination plug, receptacle and disconnect switch. With Decontactors installed, workers can safely and easily make and break electrical connections under full load.
The receptacle's dead front prevents access to live parts and thus, exempts workers from needing to follow OSHA/NFPA 70E specified work procedures associated with performing energized electrical work.
 
Decontactors allow qualified workers to change-out a motor or other electrical equipment without needing:
hazard_analysis

• Hazard Analysis

  as required in NFPA 70E 2004 Edition article 130.3
mechanical_interlock

• Mechanical Interlocks

  as required for use with
  non-hp rated plugs and   receptacles
voltage_testing

• Voltage Testing

  as required in NFPA 70E 2004 Edition article 120.2(F)(2)
flash_boundaries

• Flash Boundaries

  as required in NFPA 70E 2004   Edition article 130.3
auxiliary_disconnect

• Auxiliary Disconnects

  as required in NEC 430.102
ppe

• PPE

  as required in NFPA 70E   
  2004 Edition table 130.7(C)(10)
 
hard_pipe_motor

NFPA 70E pop up summary

Visit the NFPA website to read
more about NFPA 70E
Request a FREE Product Sample
 

home | about us | products | features | benefits | literature | where to buy | contact us | sitemap

4640 Ironwood Drive • Franklin, Wisconsin 53132 • 800.824.4031 • Fax: 414.817.6161