Meltric Customer Testimonials

Below are excerpts from some of the emails that we have received from satisfied customers. We have done some minor editing including the removal of names.

FOOD & BEVERAGE INDUSTRY

In 2006 we have switched our two Kitchen areas to the Meltric Decontactor series. Most of them are 30 amp 480 volt receptacles although it is a mixed bag in those areas. I'm also using the multipin connectors. I am currently in the process of updating the next area and have several projects where I've convinced the plant engineer that a move to Meltric would be in our best interest.

I really don't have an exact count but my guess would be approximately 50 units changed at this time. I plan to keep updating the plant with the Meltric line as I have found them to be extremely reliable, cost effective, easy to install and water resistant in one of the harshest environments I have ever worked in. If money was no object I'd have every connector we use changed. I'd say my plans for 2007 would be an additional 50 units.

It has been a pleasure using the Meltric product line and I highly recommend them.

Electrician, Food Manufacturer

I ended up purchasing over twenty five pair of the Meltric 30 amp version. The plant mechanics are very pleased about this. They feel so safe when they can actually see that the motor or whatever they are working on is physically disconnected. They put their lockoffs on and there is no way that the circuit can be energized. Great product! Congratulations!

Electrical Contractor, Food Processing Plant

We have switched all of our welders to your product. I am working on our production
staff to change over also.

Controls Engineer, Food Manufacturer

We are slated to start re-building our tag-a-longs next month and are going to use your product to replace the pin & sleeve devices we presently use. This will be a total of 7 male assemblies and 9 females. I also plan to replace all welding receps on an as needed basis in the future. I really like the design of Meltrics switch rated assemblies.

Electrical Dept. Supervisor, Vegetable Farm

I am absolutely sold on these plugs, and recommend them for anyone that has backup pumps or motors not hard-wired in. I also show them on our equipment installation drawings where appropriate.

We may be adding some manufacturing equipment in our small shop sometime in the near future, and I will make sure that the electricians use these plugs when they wire in any new machines.

Sales Engineer, Systems Equipment Manufacturer– Meat Processing Industry

I have received positive responses from our brewers in the quality feel and percieved safety over our previous plug and receptacle. I was just about to order another set this week for another of our portable pumps.

Equipment Maintenance Technician, Brewing Company

We have purchased additional Meltric plugs and plan to purchase more, it is a very good design of product.

Plant Manager, Food Processing - Sausage

FOREST PRODUCTS INDUSTRY

On the very first order, we purchased 10 Plugs and 10 connectors plus accessories. That is a great product line. Thanks.

Division Elec Tech, Forest Products Company

If I were building a facility, your product would be mandatory.

Maintenance Operations Manager, Wood Products Manufacturing Facility

I've since purchased 2 more and shown them to numerous other electricians. So far they work great. Excellent product.

Thank you,
Electrical-Automation Engineer, Paper Mill

ENTERTAINMENT INDUSTRY

I like the product and really am impressed with the quality. We are going to incorporate your product in our projects now and in the future. Actually we are installing a 3-ph 100 amp in the next two weeks.

Electrical Engineer, Casino

AGGREGATE INDUSTRY

The Meltric plugs and receptacles are installed in a dusty, dirty environment with a lot of vibration and we haven’t had a lick of a problem.

Electrical Engineer, Aggregate Processing Facility

CONTRACTORS/SYSTEM INTEGRATORS/ENGINEERING FIRMS

I placed an order for some Meltric components…… I am very pleased with the product and plan to duplicate my order 26 more times in the very near future.Thanks!

Electrical and I&C Engineer, Systems Integrator

We have specified your product numerous times, as it is well suited for the rigors of an industrial environment.

Electrical Engineer, Engineering Consulting Firm

We have purchased approximately 100 Meltric devices in different forms and we are looking into changing from twistlock to these. Thanks.

(Title unknown), Panelshop

I do see the benefit of your product and plan on setting up several panels for temporary power using your company’s plugs and receptacles as my primary means of powering subpanels, making installations much safer and quicker as easy as adding the plug end to the feeder and plugging it in.

Electrician – Electrical Contractor

I recommended the purchase of 12 units by the prime contractor of the job we were performing….. He did purchase the units and we are very satisfied with them. I've been telling several electrical contractors around the area about them as well. It's a great product.

President, Systems Integrator

We are utilizing your switch rated plugs for well pumps that frequently require removal and cleaning. They save a great deal of time when removing pumps and reinstalling while improving worker safety.

Senior Electrical Engineer, Environmental Engineering Firm

OTHER MANUFACTURERS

I know that we've installed at least 100 of your switch rated plugs and receptacles so far. They've really helped a lot with the implementation of our Arc Flash program. I see us using many more in the future.

Sr. Manufacturing Engineer, Tool Component Manufacturer

Yes we did buy some plugs and receptacles, in fact we changed all of our welders over to them. This is the best plug I have used for the welders.

We are planning on using more of these in our new facility. I am not sure what we are going to need yet as our building is currently under construction. When we get in the new building
I will figure out what we need and definitely order more. Again this is the absolute best plug
I have ever used.

Engineer, Filtration System Manufacturer

We have equipped all of our welding department and as we create Mfg cells in our machine shop we are equipping all of our smaller equipment with your plugs - helps out with the regulatory end big time!

Maintenance Manager, Machinery Manufacturer

We do like these (Decontactors) a lot, as the time it takes to replace a motor or pump
is cut by at least 80%.... we are very happy with your product so far.

Maintenance Technician, Fiberglass Manufacturer

We are a great believer in your product; we routinely use the plugs for motor disconnects on all new projects. We also encourage plants to retrofit where it makes sense.

Primarily I wanted the sample to show to our NFPA 70E implementation committee during discussions on lockout and arc hazards. We are beginning arc flash studies; as we move into arc flash minimization the product (Decontactors) will be helpful as well.

Sr. Process Engineer, Textile Manufacturing

….has purchased 8 complete sets and have installed them…..These plugs and receptacles have made an impression on maintenance because of the ease and reliability. Thank you.

Electrical leader, Large Chemical Manufacturing Plant

… ..as we get time we will be shifting all our larger motors (greater that 10 HP) to these plugs with plugs installed on all spares for quick replacement. Motors of 5HP to 10HP will be done on a case by case basis.

Thank You Very Much,
Electronic Technician, Manufacturer of Surgical Supplies

Yes we have purchased more Meltric Plugs & Receptacles; our welders are plugged in with Meltric 60A Plugs and the 30A sample you gave me is being used as a compressor plug and receptacle. We love em!

Electrician, Filter Manufacturer

HEALTHCARE FACILITIES

We found out they (Meltric switch rated plugs and receptacles) are very handy and convenient to use. We had ordered 6 30amp plugs and receptacles for now, we will order some more later.

Electrical Supervisor, Hospital